Production and Function of Monoammonium Glycyrrhizinate

Monoammonium glycyrrhizinate in China is a chemical substance. This product is mainly used for the treatment of chronic persistent hepatitis, chronic active hepatitis, liver poisoning, and early liver cirrhosis.

Production method

It is obtained by using crude glycyrrhizic acid (content about 50%, weight method) as raw material and acidic ethanol as extractant. 50g crude glycyrrhizic acid was added to 170ml of 95% ethanol acidified with hydrochloric acid (Ph value 3.5 ～ 4.0), and stirred and extracted at 40 ～ 50 ℃ for 4h. After filtration, the filter residue was extracted with 100 ml of ethanol under the same conditions for 3 hours. The extracts were combined, and ammonia water or ammonia gas was added dropwise with stirring to make the Ph of the solution 7.2 to 7.5, and allowed to stand at room temperature for 0.5 h to completely precipitate.

The precipitate is triammonium glycyrrhizinate, which is dispersed into a paste with an appropriate amount of glacial acetic acid. If necessary, heat it slightly, let it stand for 1h and then filter to convert it into monoammonium salt. After crystal separation, wash with a small amount of glacial acetic acid 1 to 2 times to obtain a pale yellow crude product. Activated carbon was decolorized and recrystallized with 75% ethanol to obtain 15.5 g of white crystals with a yield of 61% and a purity of ≥98%.

The use of monoammonium glycyrrhizinate: it is used in the pharmaceutical industry for cough and phlegm treatment, liver disease treatment, etc.

Nanjing Chemical Material Corporation. (NCMC), is a professional chemical distributor company, we provide DMC catalyst, monoammonium glycyrrhizinate, methyl Iodide, allyl glycidyl ether, glycolic acid and etc. Want to know more? Please contact us.

Comments

Difference Between Sulfate And Sulfonate In Shampoo

Sulfates and sulfonates have two things in common. First, they're all anionic surfactants. Second, they are often used for personal care applications. But there are many differences. They have different molecular mechanisms. They have different functions and they have different raw materials. Sulfates Sulfate is a compound. It has carbon bonds and oxygen and sulfur bonds. They include substances such as sodium lauryl sulfate and sodium lauryl ether sulfate. At low pH, these substances plus the c-o-s bond hydrolyze to produce alcohol and inorganic sulfate. At a high pH, sulfate is stable in the base and, if ethoxylated to a relatively high level, produces a low-foaming alkali-soluble surfactant. Sulphates can be prepared by reaction of fatty alcohol or fatty alcohol ethoxylates with reagents such as SO3 or chlorosulfonic acid (CSA). The reason shampoo becomes thick foam in the shower is that it contains sulfate. Most shampoos and household cleansers contain su...

What is Polyether Polyol

Polyether polyol is prepared by ring-opening polymerization of epoxide monomers (such as ethylene oxide, propylene oxide and 1,2-epoxybutane) and a compound containing two or more active hydrogen atoms (called an initiator). In the presence of alkali catalyst, active hydrogen compounds initiate ring opening and oxide addition will continue until the required molecular weight is obtained. The number of hydroxyl groups in polyether polyol is determined by the number of unstable hydrogen atoms in the initiator. If the initiator has two active hydrogen, glycol will be formed. The reactivity of polyether polyol to isocyanates depends on the initiator and the type of epoxy monomer that ends the ring-opening polymerization. The primary hydroxyl produced by polyol capped with ethylene oxide is more reactive than the secondary hydroxyl produced by propylene oxide, which is ideal for applications requiring rapid curing time. However, the use of initiator based on ethylene oxide and a...

Polyether Polyol Manufacturing Process

Synthesis of DMC-based polyether polyol by a continuous method A certain amount of DMC catalyst is taken and uniformly dispersed in a certain amount of small molecule initiator. Add 0.5 kg of the mixture of the initiator in the small test reactor. The vacuum was replaced 1-2 times with N2, and the N2 pressure was maintained at 0.1 MPa. After heating, stirring and raising the temperature to a certain temperature, the quantitative PO was introduced into the continuous autoclave with nitrogen gas for induction. When the induction is successful (the temperature in the kettle rises and the pressure drops), the PO is continuously passed to carry out the reaction. Open the outer loop and continue to pass the PO into the continuous kettle. When the liquid in the reaction vessel is full, the PO, DMC catalyst and the initiator are continuously added to the kettle at a certain ratio and a certain speed through the power system. Continuous discharge is started when a certain pr...

Nanjing Chemical Material Corp.

Search This Blog