Skip to main content

Introduction to DMC Catalyst

 The DMC catalyst has a freezing point of 4 ℃ and a boiling point of 90 ° C. It is a colorless transparent liquid with a slight aromatic smell at room temperature. It is easy to volatilize and has the appearance similar to alcohols, esters and ketones. It can be miscible with organic solvents in any proportion, such as alcohol, ester, ketones. It is non corrosive and partially soluble in water with a solubility of 13.9g/100gH2O. Water can also be partially soluble in DMC with a solubility of 4.2gH2O/100gDMC.

     

Single bimetal cyanidation has no catalytic activity, and only DMC complex formed by DMC and ligand complexation can show catalytic activity. The zinc-Cobalt cyanide complex is the most suitable for the preparation of polyether polyol with low unsaturation and narrow relative molecular weight distribution.

 

DMC catalyst is a kind of non-toxic chemical raw material with excellent environmental protection performance and wide application. It is an important intermediate in organic synthesis. It contains functional groups such as carbonyl, methyl and methoxy in its molecular structure. It has a variety of reaction properties and has the characteristics of safety, convenience, less pollution and easy transportation in production. DMC catalyst is a promising green chemical product because of its small size. It is also an important organic chemical intermediate, because its molecular structure contains carbonyl, methyl, methoxy and carbonyl methoxy, so it can be widely used in organic synthesis reactions such as carbonylation, methylation, methoxylation and carbonyl methylation.

 

Since DMC catalyst is non-toxic, it can replace highly toxic phosgene, methyl chloroformate, dimethyl sulfate as methylating agents or carbonylation agents to improve the safety of production and operation, and reduce environmental pollution.

 

Nanjing Chemical Material Corporation is a professional chemical distributor company which is set up through the restructuring of state-owned Nanjing Chemical Raw Material Head Company. We provide Anionic Surfactant, Cationic Surfactant, monoammonium glycyrrhizinate and so on. Want to know more? Please contact us.



Labels:

Comments

Post a Comment

Popular posts from this blog

Difference Between Sulfate And Sulfonate In Shampoo

  Sulfates and sulfonates have two things in common. First, they're all anionic surfactants. Second, they are often used for personal care applications. But there are many differences. They have different molecular mechanisms. They have different functions and they have different raw materials.   Sulfates Sulfate is a compound. It has carbon bonds and oxygen and sulfur bonds. They include substances such as sodium lauryl sulfate and sodium lauryl ether sulfate.   At low pH, these substances plus the c-o-s bond hydrolyze to produce alcohol and inorganic sulfate. At a high pH, sulfate is stable in the base and, if ethoxylated to a relatively high level, produces a low-foaming alkali-soluble surfactant. Sulphates can be prepared by reaction of fatty alcohol or fatty alcohol ethoxylates with reagents such as SO3 or chlorosulfonic acid (CSA).   The reason shampoo becomes thick foam in the shower is that it contains sulfate. Most shampoos and household cleansers contain su...
Post a Comment
Read more

What is Polyether Polyol

  Polyether polyol is prepared by ring-opening polymerization of epoxide monomers (such as ethylene oxide, propylene oxide and 1,2-epoxybutane) and a compound containing two or more active hydrogen atoms (called an initiator). In the presence of alkali catalyst, active hydrogen compounds initiate ring opening and oxide addition will continue until the required molecular weight is obtained. The number of hydroxyl groups in polyether polyol is determined by the number of unstable hydrogen atoms in the initiator. If the initiator has two active hydrogen, glycol will be formed. The reactivity of polyether polyol  to isocyanates depends on the initiator and the type of epoxy monomer that ends the ring-opening polymerization. The primary hydroxyl produced by polyol capped with ethylene oxide is more reactive than the secondary hydroxyl produced by propylene oxide, which is ideal for applications requiring rapid curing time. However, the use of initiator based on ethylene oxide and a...
Post a Comment
Read more

What is Expandable Microsphere?

  Brief Introduction of Expandable Microsphere The color of the expandable microspheres  is white. Its average particle size is 10-30 μ m. Its average density is about 1100 kg / m 3 . It has a thermoplastic shell comprising a low boiling liquid hydrocarbon. When the thermoplastic shell is softened at elevated temperatures, the increased pressure of the hydrocarbon will cause the microspheres to expand 40 to 100 times. When the internal pressure of the microsphere, the shell tension and the external pressure reach equilibrium, the microspheres no longer expand. Expandable microspheres have become the world's lightest application because the density of expanded microspheres is less than 30 kg / m3 (0.03 g / cm3).   Characteristics of Expandable Microsphere The first feature is cost savings. In thermoplastic materials such as PR, PP, PVC, PET, TPR, TPU, TPV, PA and paper/paperboard, expandable microspheres can be used as lightweight fillers and blowing agents. Expandable mic...
Post a Comment
Read more