Skip to main content

Difference Between Sulfate And Sulfonate In Shampoo

 Sulfates and sulfonates have two things in common. First, they're all anionic surfactants. Second, they are often used for personal care applications. But there are many differences. They have different molecular mechanisms. They have different functions and they have different raw materials.

 

Sulfates

Sulfate is a compound. It has carbon bonds and oxygen and sulfur bonds. They include substances such as sodium lauryl sulfate and sodium lauryl ether sulfate.

 

At low pH, these substances plus the c-o-s bond hydrolyze to produce alcohol and inorganic sulfate. At a high pH, sulfate is stable in the base and, if ethoxylated to a relatively high level, produces a low-foaming alkali-soluble surfactant. Sulphates can be prepared by reaction of fatty alcohol or fatty alcohol ethoxylates with reagents such as SO3 or chlorosulfonic acid (CSA).

 

The reason shampoo becomes thick foam in the shower is that it contains sulfate. Most shampoos and household cleansers contain sulfate, but it is not popular for frizzy hair (especially curly hair) to work and damage colored hair.

 

Sulfonates

Sulfonate is a compound that has a carbon-sulfur bond. The sulfonates contain cystos-olefin sulfonates (AOS). The bond is stable in a range that allows greater pH, so it can be used in an acidic environment. The reaction of pso 3 and pso 3 can produce pso - olefin sulfonate.

 

NCMC has been developing and focusing on chemicals for more than 60 years, and now is one of the largest professional chemical suppliers in Jiangsu province, with the privilege authorized by China government for operation of hazardous chemicals, highly toxic chemicals, precursor and explosive chemicals. Contact us to know the details of Methyl Iodide or buy sodium olefin sulfonate.



Labels:

Comments

Post a Comment

Popular posts from this blog

Difference Between Sulfate And Sulfonate In Shampoo

  Sulfates and sulfonates have two things in common. First, they're all anionic surfactants. Second, they are often used for personal care applications. But there are many differences. They have different molecular mechanisms. They have different functions and they have different raw materials.   Sulfates Sulfate is a compound. It has carbon bonds and oxygen and sulfur bonds. They include substances such as sodium lauryl sulfate and sodium lauryl ether sulfate.   At low pH, these substances plus the c-o-s bond hydrolyze to produce alcohol and inorganic sulfate. At a high pH, sulfate is stable in the base and, if ethoxylated to a relatively high level, produces a low-foaming alkali-soluble surfactant. Sulphates can be prepared by reaction of fatty alcohol or fatty alcohol ethoxylates with reagents such as SO3 or chlorosulfonic acid (CSA).   The reason shampoo becomes thick foam in the shower is that it contains sulfate. Most shampoos and household cleansers contain su...
Post a Comment
Read more

What is Polyether Polyol

  Polyether polyol is prepared by ring-opening polymerization of epoxide monomers (such as ethylene oxide, propylene oxide and 1,2-epoxybutane) and a compound containing two or more active hydrogen atoms (called an initiator). In the presence of alkali catalyst, active hydrogen compounds initiate ring opening and oxide addition will continue until the required molecular weight is obtained. The number of hydroxyl groups in polyether polyol is determined by the number of unstable hydrogen atoms in the initiator. If the initiator has two active hydrogen, glycol will be formed. The reactivity of polyether polyol  to isocyanates depends on the initiator and the type of epoxy monomer that ends the ring-opening polymerization. The primary hydroxyl produced by polyol capped with ethylene oxide is more reactive than the secondary hydroxyl produced by propylene oxide, which is ideal for applications requiring rapid curing time. However, the use of initiator based on ethylene oxide and a...
Post a Comment
Read more

Polyether Polyol Manufacturing Process

  Synthesis of DMC-based polyether polyol by a continuous method   A certain amount of DMC catalyst is taken and uniformly dispersed in a certain amount of small molecule initiator. Add 0.5 kg of the mixture of the initiator in the small test reactor. The vacuum was replaced 1-2 times with N2, and the N2 pressure was maintained at 0.1 MPa. After heating, stirring and raising the temperature to a certain temperature, the quantitative PO was introduced into the continuous autoclave with nitrogen gas for induction. When the induction is successful (the temperature in the kettle rises and the pressure drops), the PO is continuously passed to carry out the reaction. Open the outer loop and continue to pass the PO into the continuous kettle.   When the liquid in the reaction vessel is full, the PO, DMC catalyst and the initiator are continuously added to the kettle at a certain ratio and a certain speed through the power system. Continuous discharge is started when a certain pr...
Post a Comment
Read more